Saturday, January 29, 2011

AP3500/AP4700 - Resetting AP to Factory Defaults

Bootrom

Use the following process to reset the configuration on an Altitude AP3500/AP4700 unit.
  1. Boot the AP connected to serial port
    • null modem cable
    • 19200, N, 8, 1, no parity, no flow control
  2. Press the escape key after the AP boots up and the following prompt appears:
    Press escape key to run boot firmware ..... 
  3. Enter the reset config command at the boot prompt
    boot>  reset config
  4. Enter the reboot command to reboot the AP

CLI

system
config
default
yes